Corrosion Preventatives & Anti-Corrosion Products
Showing all 10 results
-
This CID covers solvent dispersed corrosion preventive compound referred to herein as “compound” for spray, brush, or dip application on new and fielded motor vehicles and trailers.
-
This specification covers a suitably formulated petrolatum-base corrosion preventive compound.
-
This specification is canceled. Superseded by MIL-C-81309
-
This specification covers an oil-type corrosion preventive which shall be a satisfactory lubricant for aircraft engines when applied as specified.
-
MIL-DTL-85054 specification (formerly AMLGUARD) covers a transparent, water-displacing, corrosion preventive compound, available in high and low volatile organic compound (VOC) types, which may be applied by brushing or spraying (see 6.1).
-
The MIL-PRF-16173 performance specification covers solvent-dispersed corrosion preventive compounds that deposit thin, easily removable films after evaporation of solvent.
-
This specification covers a petroleum base oil soluble corrosion/rust inhibitor coating compound with such additives as necessary to minimize rust formation and corrosion in water systems.
-
This specification covers a petroleum base oil soluble corrosion/rust inhibitor coating compound with such additives as necessary to minimize rust formation and corrosion in water systems.
-
This specification covers the requirements for two types and two classes containing two grades of ultra-thin film, water displacing, corrosion preventive compounds which may be applied by dipping, spraying, brushing or by spraying from self-pressurized containers.
-
This specification covers the requirements for one type of corrosion-preventive oil for preservation of engines which normally operate on synthetic base oils. This oil is identified by NATO Code Number C-638.